Part Number Hot Search : 
BR15005 HC165 MAS1C MB84V LCFS1051 1020080Z M1150 HMC313
Product Description
Full Text Search
 

To Download PLE0E821MDO1 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
LE
Ultra Low ESR
series
Ultra Low ESR, High ripple current. Load life of 2000 hours at 105C. Radial lead type : Lead free flow soldering condition correspondence Adapted to the RoHS directive (2002/95/EC).
LE
Low ESR
LF
Specifications
Item
Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance tan ESR ( 1) Leakage Current ( 2) -55 ~ +105C 2.5 ~ 6.3V 470 ~ 1500F 20% at 120Hz, 20C Not more than value of Standard ratings Not more than value of Standard ratings Not more than value of Standard ratings. 1.25 1.25 Capacitance change tan ESR ( 1) Leakage current ( 2) Within 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Initial specified value or less (100kHz) at 120Hz, 20C at 100kHz, 20C After 2 minute's application of rated voltage. 20C
Performance Characteristics
Characteristics of Temperature Z+105C / Z+20C Impedance Ratio Z - 55C / Z + 20C
After 2000 hours' application of rated voltage Endurance at 105C, capacitors meet the specified value for life characteristics listed at right.
After 1000 hours' application of rated voltage Damp Heat at 60C 90%RH, capacitors meet the specified value for life characteristics listed at right.
Capacitance change tan ESR ( 1) Leakage current ( 2)
Within 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Initial specified value or less
Resistance to Soldering Heat
To comply with recommended conditions for reflow soldering. Pre-heating shall be done at 150 ~ 200C and for 60 ~ 180 sec. Peak temp. is 265C, within 10 sec. Measurement for solder temperature profile shall be made at a point on the terminal nearest where the terminals protrude through the soldering side of PC board. Navy blue print on the case top.
Capacitance change tan ESR ( 1) Leakage current ( 2)
Within 10% of initial value ( 3) 130% or less of the initial specified value 130% or less of the initial specified value Initial specified value or less
Marking
( 1) ESR measurements should be made at a point on the terminal nearest the end seal of the capacitor. ( 2) Conditioning : If there is doubt about the measured result, measurement should be made again after the rated voltage is applied for 120 minutes at the temperature of 105C. ( 3) Initial value : The value before test of examination of resistance to soldering.
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
LE
series
Dimensions
Capacitance Lot. No. Laminated Case Silvered lead Wire
Type numbering system (Example : 4V 680F)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
PLE 0G 6 8 1 MDO 1 TD
D+0.5 MAX P 0.5
LE 680 g 681
Secondary code Size code Configuration
Capacitance tolerance ( 20%)
d Series Voltage (g:4V) L+0.5MAX 15MIN 4MIN
Rated Capacitance (680F) Rated voltage (4V)
Voltage
V Code 2.5 e 4 g 6.3 j
Configuration
(mm)
Series name Type
Size D L P d
8 x 9L 8.0 8.5 3.5 0.6
8 x 12L 8.0 11.5 3.5 0.6
10 x 13L 10.0 12.5 5.0 0.6
D x L
8x9 8 x 12 10 x 13
Code CO DO DO
Standard ratings
Rated Voltage (V) Rated Capacitance (F) Case Size D x L (mm) tan Leakage Current (A) ESR (m) (20C / 100kHz) Rated ripple (mArms) (105C / 100kHz) Code
560 820 2.5 820 1000 1500 560 4 680 820 1200 470 6.3 680 820
8x9 8x9 8 x 12 10 x 13 10 x 13 8x9 8 x 12 10 x 13 10 x 13 8 x 12 10 x 13 10 x 13
0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08
280 410 410 500 750 448 544 656 960 592 857 1033
5 5 5 5 5 5 5 5 5 5 5 5
6000 6300 6600 7100 7300 6000 6500 7000 7200 6400 6700 6800
PLE0E561MCO1 PLE0E821MCO6 PLE0E821MDO1 PLE0E102MDO1 PLE0E152MDO1 PLE0G561MCO1 PLE0G681MDO1 PLE0G821MDO1 PLE0G122MDO1 PLE0J471MDO1 PLE0J681MDO1 PLE0J821MDO1
: In this case, 6 will be put at 12th digit of type numbering system.
Design, Specifications are subject to change without notice.
Printed in Japan T.2006.I.1C


▲Up To Search▲   

 
Price & Availability of PLE0E821MDO1

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X